-
Hi, when I'm working in ft8 (JTDX) and saving the QSO data, the wrong time is saved in the log - a difference of 3 hours, as if it is being converted to UTC again.
Link to the video with the problem.…
-
Create or modify so that you can send commands/messages to the WSJTX host. Currently the nodes here only receive data from the host. The protocol allows sending commands to:
- Initiate a QSO
- Log…
-
Slicemaster V0.10.8a starts WSJT-X v2.5.4 initially but then immediately stops it on Windows V10.0.19044
Using SmartSDR V3.3.29 on a MS Surface Pro 7 tablet
(note that WSJT-X works fine with SmartSD…
-
Is it possible to make the time window a little bit longer. It never happens that I have enough time to react in 2 seconds. Transmitting is always starting in the next time window, 30 seconds later. …
-
# Description
ESDR3 is connected via 2 VACs:
![Screenshot_20230514_003440](https://github.com/ExpertSDR3/ExpertSDR3-BUG-TRACKER/assets/8482998/7c10461e-fc32-41f7-9b73-f2218d60dafb)
The audio setu…
-
Add ability to multicast rig info and control rig via common API via UDP network inteface.
This will allow multiple programs to listen instead of polling and also control the rig.
-
Rig: Yaesu FT-991A
Cable: few different USB-OTG cables, few different USB cables
Phone: Samsung A51 / UI5.1 (testing with Samsung S21FE), change UI lang w/ no results
Problem: no rig control / no T…
-
GQ Client/Server 0.10.0 Pre 4 - Stations disappear from display after a few minutes. Console window shows "Station Index Has Changed!" when it happens. Restart the client and connect to server and sta…
-
With 2.0 the readme is still in the 'work in progress' state and should be updated to reflect the current state of things. Document the "sendable" commands to WSJT-X properly.
-
Version 2.5.4 of WSJT-X use a new command for setting frequency:
F VFOX [freq]
where X is A|B and so
but rigctl server in SDR++ is awaiting only a command as:
F [freq]
Regards
Franco S…