-
Since version 'v3.5.2' of this module example application [mbed-client-example-6lowpan](https://github.com/ARMmbed/mbed-client-example-6lowpan) (branch [`master`](https://github.com/ARMmbed/mbed-clien…
betzw updated
8 years ago
-
Hi,
in the early days of 6lowpan support, there was 802.15.4 6LoWPAN only.
It is still in an experimental state, but was completely unusable in these days.
We changed now the ARPHRD from ARPHRD_IEEE8…
-
Hi,
Setup uses a FRDM board as mbed client in 6lowpan with a border router.
Although, it works and gets detected in mbed device connector. But I didn't understand the reason for the API to return -1.…
-
Using K64F & default `mbed_app.json`, the gateway firmware is "gateway6LoWPANDynamic.bin" from https://github.com/ARMmbed/mbed-os-example-client.
Then, got "Bootstrap start failed", details log as bel…
-
Hi,
I want to connect to local mDS instead of mDC because my contry do not support for IPv6 connectitvity...
So, I did some change in main code as follow,
1. coaps://[2607:f0d0:2601:52::20]:5684 TO "…
-
Hi,
My ISP provides IPv4 only and so a local IPv6 network using a Dlink router is created.
The border router is connected to this network.
But the `Ethernet bootstrap Ready` message is not seen.
FYI…
-
Please excuse me if this has already been answered. I've seen many similar posts but could not figure out the complete solution to my problem.
My setup is a Beaglebone Black edge router connected via…
-
I am trying to get the mbed-os-example-client to run on an STM Nucleo F401RE with the 6LoWPAN shield and the configuration.
In order to do so, I modified
```
diff --git a/mbed_app.json b/mbed_app.js…
-
Using FRDM-K64 board as client (with Firefly RF shield) and Firefly GW router.
**GW_ROUTER debug log**
[DBG ][core]: Allocate Root Tasklet
P.Init
[DBG ][pana]: Init
[DBG ][sck ]: Socket id 0 allocat…
-
I'm feeling sorry to leave message which is not about development issues here again, but I don't know where should I leave the question...
According to the Note( Note : this Border Router does not su…