-
If you own an ECU-C or ECU-R with Sunspec logo on the back you will have compatibility issues.
![image](https://user-images.githubusercontent.com/82239374/163632557-10e7e053-eb11-4cea-99f1-d15087701…
-
Does this integration still work on HA core-2022.6.6 /Home Assistant OS (supervised), Python-versie | 3.9.12, OS 5.15.32-v8
Components are installed everything is in its place/folder only the integra…
-
Hi, I'm getting the error below when attempting to activate the integration:
```
Este erro originou-se de uma integração personalizada.
Logger: custom_components.apsystems_ecur.config_flow
S…
-
Got it all working with 4 DS3 inverters, total outputs still are off from Shelly EM and a Tuya meter I got between the lines. Shelly EM total today 21.1KW and total sum from the ECU gives 22.65.
Also…
-
Hello,
i install integration 1.2.11 by HACS, but i haven't any page, prompt to enter ip adress my ECU-R. MY Home Assistant 2022.3.5. I don't know how configure it ...
-
This is to report the calibration factor for **DS3-L.**
I did bench measurements with DS3-L connected to a power supply in cc mode. AC power was recorded with a LMG450 power meter.
DC voltage was se…
-
Hi everyone!
I just received my nodeMCU and CC2530, Flashed "ESP-ECU_v9_3" and "CC2530ZNP-with-SBL.hex" for reading out my APSystems QS1.
In webinterface, I can't save/pair any inverter. Is the …
-
I tried adding my ECU-C to this. The ECU-C is connected to wifi when I go to add the device I get "Can't connect to ECU, check log"
The log is attached below.
This error originated from a custom…
-
Hi,
have installed dbus-mqtt-devices latest version on Cerbo v2.91.
Pvinverters will be registered and are listed as devices in VRM with deviceInstance number.
I can also publish values to them an…
-
Updated HA from 2021.12 to 2022.2 and this plugin from the versionless 2022.1 to the current 1.2.11 via HACS. Now am unable to configure the plugin (was working fine via YAML) When I add in the wifi…