-
I am using an arduino uno board and have placed the new ATmega328chip in the socket as a simple setup. However, I am unable to burn the bootloader. I am using your minicore and selected the ATmega328 …
-
Some libraries (ex: [Adafruit_BME280](https://github.com/adafruit/Adafruit_BME280_Library/blob/master/Adafruit_BME280.h#L218), [SparkFun_ICM-20948_ArduinoLibrary](https://github.com/sparkfun/SparkFun_…
-
Hi uStepper-Team,
my trial to get the uStepperS working failed. I am running Debian 10 GNU/Linux and installed a new Arduino IDE via flatpack /flathub (v1.8.13) and followed the [steps](https://git…
-
Feature request, Processor Model, Stepper driver, and/or example config request, I am not sure.
I am not sure where best to ask for help. Brand new to Klipper, so please be gentile.
Supporti…
-
I have been working on OTA uploading to an ATtiny3224 via serialUPDI over Bluetooth and I found a major problem that appears to effect all Bluetooth devices. I tried a total of 7 different Bluetooth-U…
-
ESC voltage is sent as Esc amperage.
Castle Creations Talon 90
Pololu ATmega328PB
-
BEC voltage is sent as zero.
I don't know if the esc sends a value since I don't have …
-
Hi
Thanks for making the code available for my favorite temp sensor. Have you considered implementing readout for single GPIO mode (power from VDD instead of pin)?
To start the pulse counter pr…
bob-u updated
3 years ago
-
I am trying to use PC5 (A5, pin 28) on Atmega328PB as input. But I think mcufriend_shield.h is conflicting. Here is the section from my mcufriend_shield.h
`
#elif defined(__AVR_ATmega328P__) || d…
-
Please see
https://github.com/arduino/toolchain-avr/issues/66#issuecomment-623088720
https://github.com/watterott/ATmega328PB-Testing/issues/51
File **hardware\tools\avr\avr\include\avr\powe…