-
Has anyone tried to run Marlin on a Chitu F Series V3.9 Board? http://www.cbd-3d.com/en/prod/fdm.shtml
It came with a 3.5 TFT Color TouchScreen on my QIDI X-One. Running Marlin would be a huge improv…
-
### Bug Description
Extruder driver seems to stop during first layers of almost every print, sometimes it can work a little longer. It happens for me only on Marlin, and I never saw this problem on…
-
PIO Core Call Error: "b''\n\nError: Unknown environment names 'lpc1768'. Valid names are 'DUE_debug, ARMED, DUE_archim, LPC1768, STM32F103VE_longer, mks_robin_mini, trigorilla_pro, at90usb1286_cdc, ST…
-
_From @Roxy-3DPrintBoard on March 30, 2016 19:59_
The Atmel ATSAM3x8e on the Due board is definitely viable. It has the benefit it can plug into the RAMPS or RADDS base board and at that point it i…
-
I'll get it in a few days from now. It is compatible with Chitubox but I don't know anything else. I just hope that the pins are already on the board
-
Hello
I did read that the raspberry pi gpio are 3V3 and not 5V tolerant. And the instructions talk about direct connections.
Seeing the 5V pin on the printer motherboard let me think about 5V signals.…
boucz updated
3 years ago
-
PIO Core Call Error: "Error: Unknown environment names 'atmega2560'. Valid names are 'STM32F407VE_black, ARMED, mks_robin_nano, STM32F4, mks_robin_nano35, STM32F103VE_GTM32, mks_robin, mks_robin_lite,…
-
PIO Core Call Error: "b''\n\nError: Unknown environment names 'megaatmega2560'. Valid names are 'FYSETC_S6, DUE_debug, STM32F103RC_fysetc, STM32F103RC_btt, STM32F103RC_btt_512K, BIGTREE_GTR_V1_0, FYSE…
-
### Bug Description
When using platformio, the corresponding firware.bin and firmware.elf files are incompatible with the chitu board's processor
### My Configurations
--Valid, tested configu…
-
### Bug Description
This is a continuation of discussion from PR https://github.com/MarlinFirmware/Marlin/pull/18438. Several issues still exist:
### To-do
- [ ] Upgrade to LVGL 7.x
### Comp…