-
I've been wanting to poke around with IPv6 multicast for a while, and I've collected some thoughts that might turn into an implementation at some point...
The first thing is that dual-stack sockets…
-
Trying to create a environment with 2 Networks, 2 VMs with 2 NICs each connected to the respective networks.
This same environment, but with only 1 network doesn't give any problem.
## System In…
-
Hi!
There is an example to config with static ip?
-
Hi,
the dhcpcd(8) man page says
> If a single interface is given then dhcpcd only works for that interface
> and runs as a separate instance to other dhcpcd processes.
This is not true, …
-
The module is failing compilation in `lease_mgr.cc` with Python 3.9 and Kea 1.8.0 under Ubuntu 21.04 on aarch64:
```
admin@h-tst-smbdc-01:~/src/kea_python/keamodule$ python3 setup.py install
runnin…
-
### Port, board and/or hardware
W5500-EVB-PICO
### MicroPython version
MicroPython v1.23.0 on 2024-06-02; W5500-EVB-Pico with RP2040
### Reproduction
Master Code running on a PC:
```
import s…
-
It would be nice if ONIE supported https:// , but it does not.
The wget provided by busybox does not support https and it probably never will.
It gets a little complicated about what to do with cert…
-
setHostname works fine when connecting to an existing access point, but it's not working when creating one.
Working
```cpp
WiFi.setHostname(hostname);
...
while (status != WL_CONNECTED) {
…
-
posix mode able to exit successfully, but DPDK mode causes SIGSEGV:
```
Checking link status
Created DPDK device
...............................................done
Port 0 Link Up - speed 10000 …
-
I used command:
`` tmt run -avvv --skip finish plan --default execute --how tmt --interactive test --name . provision --how minute --image rhel9 login``.
In my current directory is almost nothing…