-
Hello,
I saw many issues like those one :
https://github.com/platformio/platform-ststm32/issues/468
https://github.com/platformio/platform-ststm32/issues/205
and I was wondering if someone kn…
-
Hi sir,
I am using windows OS. I installed bronzebeard and it assembles properly the Longan nano example and outputs a bb.out file . I tried to install zadig but the longan nano cannot be programmed …
-
I tried [openwrt-21.02.1-squashfs-sysupgrade](https://downloads.openwrt.org/releases/21.02.1/targets/ramips/mt7621/openwrt-21.02.1-ramips-mt7621-xiaomi_mi-router-4a-gigabit-squashfs-sysupgrade.bin) an…
-
Hi,
We designed a hardware with an ESP32 of 16MB, and we found that different devices have different "erase_flash" times. Some of them takes about 1 minute, which corresponds to the time of the dat…
-
Hello everyone! Firstly i hope this is right place to post my problem. If it's not please redirect me to another section. I'm trying to build a Cmake based project on target: Sipeed Longan Nano, which…
-
**Describe the bug**
As first seen in #41673, GD32-based `longan_nano` board build fails because of redefinition of CAN_MODE_NORMAL.
```
In file included from /__w/zephyr/zephyr/tests/drivers/can…
-
hello,
as below:
```
cargo dfu --chip gd32vf103 --example hello
Finished dev [unoptimized + debuginfo] target(s) in 0.01s
Searching for a connected gd32vf103.
Found GigaDevice G…
-
Greetings!
I recently ordered a new batch of PCBs and it seems like the flash chip of two of them are having issues. I can flash the software included in the repo and everything works properly but …
-
After flash the image from official buildbot, the router can not boot. It will not reboot automatically.
When I flash initramfs image in **breed**, it does boot, but when flashing any squashfs image …
skbeh updated
2 years ago
-
I can;t seem to get this to work - I run this following the windows/docker instructions. I don't get any errors, but can't connect via telnet, ssh or any other means after running this.
I did notic…