-
Hi All,
I have a decently flying Revolt V2 quad running BF 3.1.7 FW and using the Bolt 4in1 ESCs. Raceflight one was untunable/unstable so I flashed BF on Revolt V2. I am glad I did, because after…
-
With 3.4.0 RC2 on a RacerStar StarF4S OmnibusF4 target, enabled OSD and 'Rtc DateTime' displayed in the flight summary (which is default), the FC will freeze when being disarmed.
A power cycle is nee…
-
i just loaded bf 3.4r2 and leds stopped working had them mapped to motor 5 resorced them
as they led pad has never worked and was told to do this by devs before , my other quad with exact
same set…
-
Last weekend I went to a lot of places with Nearby as my guide.
In the Nearby screen, after touching +, I used both the camera button and the gallery button, with always the same result: No changes t…
-
just flashed 3.4rc2 from 3.3.3 and now the rgb ledstrip isnt working.
flight controller is a holybro kakute v2
here is the dump
# dump
# version
# Betaflight / KAKUTEF4V2 (KTV2) 3.4.0 Jun…
-
my rssi is flashing 0 rssi on my osd all the time, im using the CLRACINGF4S flight controller.
here is my dump
Entering CLI Mode, type 'exit' to return, or 'help'
# version
# Betaflight …
-
Hi,
today i tryed to calibrate the Amperemeter on my BFF3 Board with 3.2.
I can Calibrate the Ampere Meter pretty perfect on 3.1.7, the OSD says that 1204mA was used and my ISDT Chrger loads about…
-
@gkasprow Booster received and looking beautiful.
One observation before powering it one: it's *heavy*. I wonder if we could slightly reduce the weight without compromising performance. That might …
-
Hello,
This is the second time this has happened... I was able to fix it last time, but this time the frame was destroyed and it snapped in half. When i have airmode engaged and when flying at low …
-
Info:
Holybro Kakute v1 (not AIO) running SP racing 3.1.6 software
Audio is soldered to Motor 6 pad.
Standard resource mapping:
```
resource BEEPER 1 C15
resource MOTOR 1 A06
resource MOTOR…