-
Hi,
I tried with a 24v inverter from easun which however is identical to the 2424MSE1 of MPP solar looking at the esphome log I see that it sends something but receives nothing I also checked the wir…
-
Hi, can someone tell me what the config should look like if I want to monitor two Neey Balancers?
-
In my opinion, the cell number of the smartbms should be the total cell number of the system. 32 in my case (2x16cell real BMS)
Habe den BSC …
-
Hi, I came across this repository by searching for 8 bytes that happen to appear in the referenced file contained in this repo:
https://github.com/syssi/esphome-jk-bms/blob/b40d3ee6bc4572b9e38cc20fd0…
-
I previously mentioned this issue regarding Battery 02, when upgrading from Syssi esphome-jk-bms to Sleeper85 esphome-jk-bms-can.
I now flashed also Battery 01 in order to have more consistent read…
-
Hi @syssi
I am using your jk-bms components for quite sometimes and I discovered the following (may be related, I am not quite sure)
My setting was:
esp32S2Lolin mini
uart on Gpio9 and Gpio10
I …
-
Ich habe nochmal eine Frage bzgl JK BMS. In der Live Ansicht werden ja auch die Namen der einzelnen Komponenten wie Victron oder Hoymiles angezeigt, beim JK BMS steht aber dann bei mir "Batterie: Inp…
-
The settings password for JK-BMS can be constructed as:
"your time dependent code"+"crc8.ROHC(serilar of inverter)"
With this I am able to "unlock" settings of both mine jk-bms PB2A16S20P..
Sure…
rgr-1 updated
4 months ago
-
https://forum.drbacke.de/viewtopic.php?f=8&t=982&start=10
```
# service
0xffe0
# characteristic
0xffe1
# request device info
{0xaa, 0x55, 0x90, 0xeb, 0x97, 0x00, 0xdf, 0x52, 0x88, 0x67, 0x9…
syssi updated
3 months ago