-
Hi Aaron,
Trying to run the flashing program on a Windows 11 machine to either an ESP8266 and an ESP32 (wemos mini). Hooked up a tag to the ESP and all attempts to flash using "zbs_flasher.exe -p C…
-
This is actually an issue and a response I posted on the ampy project. See [ESP8266 Micropython "Could not enter raw repl" #19](https://github.com/adafruit/ampy/issues/19)
I am creating this issue …
-
In your decribetion of code :
WIFI
3. Allow sending a broadcast ESP-NOW packet, but make sure that the packet is unencrypted;
But in your reference V2.1.0 :
3.8 part for ESPNOW still "ESP-NOW d…
-
Hello! Want to thank you for your very cool work. But I have a little problem, I've installed needed versions of everything, compiled and flashed my Wemos D1 Mini, the screen and IR connected as in yo…
-
## Do not report new issues related to this message, instead please comment on this issue with the logs that you see and the config for that component.
### The problem
```
[00:00:00][W][compone…
-
Hi,
If i want to test this firmware what is the process of flashing it to the chip?
Is it possible to use a chip clamp to flash the chip or de-soldering and re-soldering it the only way?
Thank y…
-
Hi,
does anyone know what coud be the issue?
It happens in line "connection.init();"
`Exception 28: LoadProhibited: A load referenced a page mapped with an attribute that does not permit load…
-
I have a problem with compiling the RflinkToJsonMqtt sketch. My Common.h looks like (only defined the MQTT_SERVER_IP):
+++++++++
// MQTT Server IP
#define MQTT_SERVER_IP (192, 168, 178, 2)
// MQTT…
-
### The problem
SHT31 module fails to initialize after updating to 2024.4.0. I reverted to 2024.3.2 and verified it works there.
### Which version of ESPHome has the issue?
24.4.0
### What type o…
-
### Describe the problem
Originally reported by @per1234:
:bug: When uploading to a board over a network port, the Arduino IDE UI continues to indicate an upload is in progress even after the pr…