-
1 | ✔ | Environment - DHT11/12/22 SONOFF2301/7021 | DHT | | ❶(671) | GPIO-13 | Temperature:25.50Humidity:28.40
Edit | 2 | ✔ | Communication - IR Transmit | IR_Transmit | | | GPIO-5 |
Edit | …
dyter updated
5 years ago
-
There are several other features available on the sensors as per the datasheets for [MH-Z19](https://www.winsen-sensor.com/d/files/PDF/Infrared%20Gas%20Sensor/NDIR%20CO2%20SENSOR/MH-Z19%20CO2%20Ver1.0…
-
HI
Today I try and test again hassos ver. 1.7 for 32bit and 64bit , it is very sad, the same situation is with ver 1.5, no data transfer by checking. waiting for almost 20 minutes every time.
I test…
-
I'm using Yahka Version 0.9.0 and I'm trying to display the data of carbon dioxide concentration sensor that outputs values in ppm units.
In Yahka I configured a sensor device with the "CarbonDioxi…
-
Hi there,
My library was recently uploaded: https://github.com/WifWaf/MH-Z19
This is almost certainly my error (I'm new to this). I'm struggling to get the examples to appear in Arduino IDE "FIl…
-
**Home Assistant release with the issue:**
Issue observed with 0.69
**Last working Home Assistant release (if known):**
not known
**Operating environment (Hass.io/Docker/Windows/etc.):**…
-
I attached an MH-Z19 sensor to the GPIO pins of my Raspberry Pi 3 according to [this](https://home-assistant.io/components/sensor.mhz19/).
Under Raspbian this sensor is accessed by the python library…
-
## Mycodo Issue Report:
- Specific Mycodo Version: Current sensor implementation in mh_z19.py
#### Problem Description
The MH-Z19B sensor is shipped with automatic baseline correction e…
-
Hello Xose,, I have same problem witth MHZ19 , maybe here's the same problem with the serial?
Does it work for you?
Thanks
![image](https://user-images.githubusercontent.com/36038526/41778698-376…
-
Can you provide a definitive GPIOS list for Template since there are still some missing in the console command.