-
I have an attiny85 running at 5V from the USB-port, datalines are connected to pb3/4 using 3.6v Zeners. D- is pulled up with a 1K5 resistor. I have flashed this file: https://github.com/Bluebie/micron…
-
I tried to set up the arduino IDE with the micronucleos bootloader, for the DigiSpark.
i went through: http://digistump.com/wiki/digispark/tutorials/connecting#linux
but at the point where i had to…
-
When uploading any hex file always gives a -5 error in the erasing part. I've tested it with 1.3 and 1.4 bootloader. I'm using the littlewire schematic only that instead of zener diodes I'm powering t…