-
```
1. Create a test program using the "Simple Modbus TCP slave example" code
from NModbus site. Then add some test data for holding registers reading
simulation.
The resulting code is in the attache…
-
```
1. Create a test program using the "Simple Modbus TCP slave example" code
from NModbus site. Then add some test data for holding registers reading
simulation.
The resulting code is in the attache…
-
```
1. Create a test program using the "Simple Modbus TCP slave example" code
from NModbus site. Then add some test data for holding registers reading
simulation.
The resulting code is in the attache…
-
```
1. Create a test program using the "Simple Modbus TCP slave example" code
from NModbus site. Then add some test data for holding registers reading
simulation.
The resulting code is in the attache…
-
```
When running example rtuslave_example.py get the following error
server error: could not open port COM1: [Error 5] Access is denied.
rtumaster_example.py seems to open serial port ok - have no m…
-
```
1. Create a test program using the "Simple Modbus TCP slave example" code
from NModbus site. Then add some test data for holding registers reading
simulation.
The resulting code is in the attache…
-
Hi I managed to run micropython on the STM32F4DISCOVERY board easily, here are some notes:
- rtc_init has to be commented (for some reason haven't look at it probably I/O is used for something else)
-…
-
I was wondering what Item path you used when using Ignition. I have not been able to read the response from the slave. The connection is good and I can see the slave responding.
I have got Ignition t…
-
```
1. Create a test program using the "Simple Modbus TCP slave example" code
from NModbus site. Then add some test data for holding registers reading
simulation.
The resulting code is in the attache…
-
```
When running example rtuslave_example.py get the following error
server error: could not open port COM1: [Error 5] Access is denied.
rtumaster_example.py seems to open serial port ok - have no m…