-
On current master, when entering binding mode, the TX attempts to switch to 500Hz mode because all binding happens at 500Hz. However, if the baud rate is 115200, the RF will limit the rate to 250Hz. T…
-
Cannot switch from external to internal antenna.
![16252250321827863457795312408980](https://user-images.githubusercontent.com/48190425/124267600-c124d480-db38-11eb-956c-41a6f8299765.jpg)
-
I purchased a FrSky R9M 2019 and 2 R9MM-OTA.
Did the external Access Mod.
Flashed R9M with ACCESS firmware FW-R9M2019_ACCESS_V1.3.0.
Flashed the R9MMs with ACCESS firmware FW-R9MINI-R9MM-OTA_v1.3.1…
-
Just updated openTX to 2.3.14 and module Isrm to V2.1.6 along with receivers to latest firmware R9SX & RX4R as I am using two receivers for dual frequency redindancy. All has been working fine until…
-
Instead of CRSF output, generate PWM signals to drive servos.
It would be great to have ExpressLRS drive servos directly for fixed wings that wouldn't have a flight controller. The developers have …
-
The RSSI dBm readout is consistently higher while using the higher packet rate (50Hz vs 200Hz). At the same output power and the same distance and position of the RX and TX the RSSI dBm is always high…
-
https://github.com/ExpressLRS/ExpressLRS/blob/acb1a829ec2cd59f20f4a2ee1fb207b87af5ccee/src/lib/POWERMGNT/POWERMGNT.cpp#L144
-
## Expected Behavior
build R9M firmware (or any firmware. nothing is working)
## Current Behavior
gives me an error regardless of what firmware I try to build.
## Steps to Reproduce
…
-
I got Horus X10 with ISRM and Para update.
First issue is on model wizard. I was able to create first model, but I ot able to create second one through wizard. After selecting + I get (glider, airpl…
-
### Describe the bug
I have found, that luascript stopped working after betaflight version: 4.3.0 2563. I have tested most previous and newer versions. By this i have narrowed down this version which…