-
```
Test setup:
Software:
Ardunio 1.5.4, Windows XP
SdFatBeta20130621
Hardware:
Arduino Due
DFRobot SDCard board with very short leads, soldered to 6 pin SPI connector. SS
= pin 10 (see image)
Sams…
-
I was trying to connect MPU-6050 and getting gyro readings but compilation terminated by saying "fatal error: avr/io.h: No such file or directory"
what should i do?
-
```
Test setup:
Software:
Ardunio 1.5.4, Windows XP
SdFatBeta20130621
Hardware:
Arduino Due
DFRobot SDCard board with very short leads, soldered to 6 pin SPI connector. SS
= pin 10 (see image)
Sams…
-
```
Test setup:
Software:
Ardunio 1.5.4, Windows XP
SdFatBeta20130621
Hardware:
Arduino Due
DFRobot SDCard board with very short leads, soldered to 6 pin SPI connector. SS
= pin 10 (see image)
Sams…
-
```
GetInterfaceInfo method uses WinUsb_QueryInterfaceSettings function with zeroed
AlternateInterfaceNumber. By the USB standard each interface can have alternate
one, so zeroing this setting is wr…
-
On the Arduino Due (Arduino library 1.6.1), if you read several different analog pins in succession using analogRead(), some of the values may be off. For example, I had temperature sensors A and B, w…
-
```
GetInterfaceInfo method uses WinUsb_QueryInterfaceSettings function with zeroed
AlternateInterfaceNumber. By the USB standard each interface can have alternate
one, so zeroing this setting is wr…
-
```
GetInterfaceInfo method uses WinUsb_QueryInterfaceSettings function with zeroed
AlternateInterfaceNumber. By the USB standard each interface can have alternate
one, so zeroing this setting is wr…
-
```
GetInterfaceInfo method uses WinUsb_QueryInterfaceSettings function with zeroed
AlternateInterfaceNumber. By the USB standard each interface can have alternate
one, so zeroing this setting is wr…
-
```
GetInterfaceInfo method uses WinUsb_QueryInterfaceSettings function with zeroed
AlternateInterfaceNumber. By the USB standard each interface can have alternate
one, so zeroing this setting is wr…