-
I have recently implemented wireless debugging using the code from this repository. However, maintaining it on both ends can be quite challenging. You can find the code for wireless debugging at this …
-
I have recently adopted my µPIDE Micropython IDE to use pyboard.py for remote communication. I soon noticed that transfers from the device to the host are 5 times slower under Windows 10 than under Li…
-
Hello, I have a T-ECHO device without wifi, may I bridge this device connected to a serial port with a regular MQTT meshtastic server with two-way communication with other nodes?
If yes, may you prov…
-
**Is your feature request related to a problem? Please describe.**
On this specific laptop I have an Atheros card, usually it has a tendency to crash completely (has been doing this since approxima…
-
I would love support for my [Supermicro X7DBU](http://www.supermicro.com/products/motherboard/xeon1333/5000P/X7DBU.cfm) (Super IO: [Winbond W83627HF/F/HG/G](https://media.digikey.com/pdf/Data%20Sheets…
-
# You can use milestones to track progress on groups of issues or pull requests in a repository.
https://docs.github.com/en/issues/using-labels-and-milestones-to-track-work/about-milestones?apiVersio…
mbz4 updated
5 months ago
-
It should have been like this from the beginning. Also:
For serialization, have a look over here: https://github.com/wucke13/mavlink-msp-bridge/blob/master/src/msp.rs#L405
For deserialization, over…
-
As Teensy 4.1 is equipped with 100MBit Ethernet chip, it'd be a good alternative to have the bridge run via nework, rather than the serial port.
For details check description on [Teensy 4.1 websit…
-
CARLA version: 0.9.6
Platform/OS: Ubuntu 20.04
Problem you have experienced: Hi I am following this tutorial to set up CARLA with Apollo 5.0: https://github.com/AuroAi/carla_apollo_bridge. In "USA…
-
We have written the needed data into your clipboar
Type: Bug
When I execute the "flash erase tool" I get an Error message:"A fatal error occurred: Unable to verify flash chip connection (No seri…
ghost updated
2 months ago