-
Qualcomm ar71xx is a big endian host. It is found that MCU communication is using small endian and is not compatible with big endian.
-
The hardware in question is the iC880a-SPI concentrator controlled using the SPI interface of the Raspberry Pi 3 using the spi_bcm2835 module.
Upon calling lgw_start(), occasionally the debug informa…
-
Hello all,
I am trying to make SX1301 util_pkt_logger to listen for the custom messages using FSK demodulator. I do already receive some kind of response on every sent message, but the payload loo…
-
I am trying to flash the FPGA using the SEGGER JFlashSPI utility, but it seems to want a binary image.
I see that the FPGA images are now in a .hex format. What type of hex format is this? Intel, M…
-
Under a stress test (high traffic: simultaneus transmissions from several devices (>6) on different SFs and Freqs) of the Packet Forwarder/Logger I have found **periodic pauses of several seconds** in…
-
- [x] The issue is present in the latest release.
- [x] I have searched the [issues](https://github.com/brocaar/chirpstack-network-server) of this repository and believe that this is not a du…
-
- [x] The issue is present in the latest release.
- [x] I have searched the [issues](https://github.com/brocaar/chirpstack-network-server) of this repository and believe that this is not a du…
-
Hi everyone,
is it possible to run packet forwarder with a Raspberrypi 3 and a RFm96 module
-
Hi,
I'm using PiHAT with RAK2247, when I setup TTNv2, everything seems to be working fine, in console I can see gateway connected.
When I changed to v3 and setup gw in TTS console, it seems to b…
-
In the LoRa Gateway window, all four status areas have a green checkmark. In the Helium IoT window, the gateway_key.bin file is loaded with version (helium_gateway 1.0.0-alpha.21), the hotspot key is…