-
Hi!
This line https://github.com/cleanflight/cleanflight/blob/master/src/main/rx/sumh.c#L117
sumhChannels[channelIndex] = (((uint32_t)(sumhFrame[(channelIndex
-
windows 8.1
Videocard - Intel 4 series
taulabs next_20150321
disappear systemhealth and pfd gadgets
and
welcome screen lug https://yadi.sk/i/wCaUzfGsfSbXE
after clean configuration gadgets is back
-
FlyingF3 shows an error condition from the Sensors module and does not produce data. The problem was probably introduced between October and the last master release.
-
As seen on BrainFPV with Brain-20150213-r1, disabling current monitoring will still compute erratic/floating current values, and increment mAh usage, eventually refusing to arm the FC because of Fligh…
-
On first install GCS crashes.
Intel graphics card !
![error](https://cloud.githubusercontent.com/assets/13311173/8645656/94313876-2949-11e5-9119-567313dfca6c.png)
-
When using a Graupner Hott Receiver GR-16 and activating more than 12 channels the RC input is not recognized any more.
-
Hi!
Found the following problem that would matter for anyone who uses any kind of data collecting DIY project that packs data to SPort protocol. My case: I have a Teensy board that is connected to Na…
-
There seems to be a pretty serious issue with jitter when running SyncPWM at high rates (primarily 1 kHz but also evident at 500 Hz). I've done a little testing with Sparky2, MPU9250 @ 1 kHz sample ra…
-
Hello all. i am 76 years young and am trying to get my new F3 into a flying state.
Installed the St link and flashed ok.Changed usb position for GCS bootloader and press black button on F3.Leds.Blue a…
-
During upgrader, thread #1 segfaulted by de-referencing `sessionRetrieveTimeout 0x0 QTimer *` in `TelemetryMonitor::retrieveNextObject`:
```
Thread #1 Locals in TelemetryMonitor::retrieveNextOb…