-
Use one of the two templates below and **delete the rest**.
8
-
Hi all
I did try to see if there was a similar issue, but nothing appeared to match my exact problem.
I have to power my oled direct from a 5v source (3.3v from esp wasn't sufficient).
If I wri…
-
Use one of the two templates below and **delete the rest**.
8
-
Use one of the two templates below and delete the rest.
8
-
Hey,
I connected Wemos D1 min Pro to ILI9341 LCD without touch IC.
Problem:
The display permanently switches ( two times per sec ) between 12 hour and 24 hour time display.
The forecast also get…
-
### Expected behavior
That `uint8_t allowedHours[] = {12};` is declaring 12H time format, so that when a user changes the utc TZ timezone, it correctly sets the offset
### Actual behavior
`ui…
-
Minor problem with all the demos, the comment describing the options for SLIDE are incorrect when it comes to sliding up from the bottom. Should state SLIDE_UP instead of SLIDE_TOP.
https://github…
-
I have an ESP8266 with buildin OLED (https://www.aliexpress.com/item/ESP8266-WIFI-Chip-0-91-inch-OLED-CP2014-32Mb-Flash-ESP-8266-Module-Internet-of-things/32822165059.html)
It useses SDA=pin 2 and …
-
### Expected behavior
Compile & upload
### Actual behavior
Errors on compiling looks like an error from minigrafx
### Test code
Provide a [Minimal, Complete, and Verifiable example](http://st…
-
8