-
I'm running `make` in https://github.com/nabilt/STM32F4-Discovery-Firmware/tree/master/Project/Demonstration and just getting:
```
$ make
arm-none-eabi-gcc -mcpu=cortex-m4 -mthumb -mlittle-endian -mf…
-
I'm looking at using my Arduino as a proxy between a PS4 and a PS4 controller.
To do this I need to forward the authentication process between the 2 devices as described here:
https://forum.gimx.f…
-
## CVE-2019-15505 - Critical Severity Vulnerability
Vulnerable Library - linuxlinux-4.19.87
The Linux Kernel
Library home page: https://mirrors.edge.kernel.org/pub/linux/kernel/v4.x/?wsslib=linux
F…
-
## CVE-2019-19052 - High Severity Vulnerability
Vulnerable Library - linuxlinux-4.19.87
The Linux Kernel
Library home page: https://mirrors.edge.kernel.org/pub/linux/kernel/v4.x/?wsslib=linux
Found…
-
## CVE-2019-19534 - Low Severity Vulnerability
Vulnerable Library - linuxlinux-4.19.87
The Linux Kernel
Library home page: https://mirrors.edge.kernel.org/pub/linux/kernel/v4.x/?wsslib=linux
Found …
-
```
[nikll@nikll ~/LogicDiscovery ]$ gmake
--
-------- begin --------
arm-none-eabi-gcc (GNU Tools for ARM Embedded Processors) 4.8.3 20131129
(release) [ARM/embedded-4_8-branch revision 205641]
Copy…
-
### Board
esp32-s3
### Device Description
i am using esp32-s3 based LVGL 7 inch display. I need to use the USB-JTAG pin19 and pin20 as gpio. i already prepared the PCB. i just made high and low pin…
-
```
What steps will reproduce the problem?
1. Alter code for Arduino 1.0 (wiring.h == arduino.h)
2. Make and run a simple app
3.
What is the expected output? What do you see instead?
Program connecti…
-
1>core.c
1>src\LibUSB\libusb\core.c(652,26): error : cannot initialize a variable of type 'struct discovered_devs *' with an rvalue of type 'void *'
1> struct discovered_devs *ret =
1> …
-
### Board
Wemos S2 mini
### Device Description
Just the board connected with usbc connected to pc
### Hardware Configuration
Nothing
### Version
latest development Release Candidate (RC-X)
##…