-
## Environment
Module or chip used: ESP32-WROOM-32E
IDF version: v4.3-242-g1f7172dbf968
Build System: idf.py
Compiler version: xtensa-esp32-elf-gcc (crosstool-NG esp-2021r1) 8.4.0
Operating S…
-
Hello!
We have a custom board that use RT1064 with a **32MB SPI flash**. We are going to use this SPI flash to store the GUI resources, and use the **internal 4MB flash** to store the code.
We …
-
I am using version 1.0.9 on esp32.
My keyboard is logitech g100s and it supports usb and ps2.
After pressing any LOCK key, nothing happens when I press any key until I reconnect the keyboard.
Se…
-
**Describe the bug**
When sending large amounts of data over Serial Monitor (string len > 204 ), the processor enters a hard fault.
Hard fault status register (SCB_HFSR) 0xE000ED2C has bit 30 set …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Debugging chili connection issues, it would be good to add some additional checks such as:
Periodically checking CA821X responsiveness
Periodically checking chili responsiveness
Detecting autom…
-
Hi,
I am trying to install debian using the debian installer for the RockPro64 on a RockPro64 with EMMC and the PCIe SATA Card.
Must say it is unclear to me if debian installed on EMMC using the…
-
以下，制御回路で気になったところです．
１）USB-miniBの利用
最近のトレンドを把握していませんが，miniBは古い規格ですのでちょっと気になりました．
２）CANとUSARTで同じコネクタを使用している
挿し間違えが発生しそうです．
異なる形状にすることが難しい場合は，例えばプラグとレセプタクルが白であれば，油性ペンで色を塗るなどして挿し間違えを防止したほうが良いです．
…
-
Hi,
First of all , thank you all very much for this fantastic Libray :)
It takes nearly exact 6 seconds to establish the connection to my PS3 navigation controller.
I also figured out, when I d…
-
1. Flash u-boot to spi
2. Flash image 0.7.9 (bionic-minimal) to an Samsung 860 PRO 256GB
3. Boot from USB2 - works fine!
4. Boot from USB3 - don't work
Log from boot on usb3 -> https://pastebin.…