-
### The problem
I added a Kwikset 914 door lock in Home assistant under ZHA. It appears as: SMARTCODE_DEADBOLT_10_W3 by Kwikset.
The lock is visible as a lock and I can successfully send lock/unloc…
-
**Is your feature request related to a problem? Please describe.**
The Sensor is recognized by ZHA but there is no motion sensor (only power, lqi and rssi, power and rssi have state unknown)
**Lin…
-
**Describe the bug**
ZHA reports iTead Sonoff ZBMini-L to have successfully paired, but ZBMini-L does not leave pairing mode and tries to pair over and over again. While the device is still re-pairin…
veitw updated
10 months ago
-
**Describe the solution you'd like**
[This is a roller blind switch from Schneider Electric.](https://zigbee.blakadder.com/Schneider_Electric_S520567.html
)
The device can be triggered for open/clo…
-
**Is your feature request related to a problem? Please describe.**
I paired the motion sensor. IAS_ZONE works but i have no entities for light sensor and scene switch. I need help for create a quirks…
B1199 updated
9 months ago
-
**Describe the bug**
I have several SmartThings Buttons M/N IM6001-BTP01 that have always worked flawlessly in ST and Home Assistant. Firmware version is 0x00000014. A while back they started repeati…
-
### Problem description
The device shows no entity.
### Solution description
The power meter provides entities for electrical measurements (RMS voltage, amps, power factor, frequency, apparen…
-
### Problem description
Aqara Water Leak Sensor T1 SJCGQ12LM lumi.flood.agl02
shows as "mains powered" and does not show a battery entity
It's supported by ZHA according to https://zigbee.bl…
-
### Checklist
- [X] I added a descriptive title
- [X] I searched open reports and couldn't find a duplicate
### What happened?
The environment file is:
```
name: rietveld
platforms:
- lin…
-
### Problem description
I am trying to add a quirk for the "LS82-Tuya" curtain motor (cover). This is a zigbee device that looks exactly as other tuya curtain motors.
### Solution description
…