-
I am relying on `dai::CalibrationHandler::getCameraIntrinsics()` to provide factory calibrated intrinsics. The problem I'm seeing is that if I configure that pipeline to output `THE_1080_P` I get the …
-
Hey,
I'm trying to start the ROS-node with my Teledyne Nano-C1940 (over GigE). The instructions I was following:
https://www.flir.de/support-center/iis/machine-vision/application-note/using-ros-w…
-
Hi Jana-Marie,
Interesting project. Do you plan to also open source the firmware ?
I'm the maintainer of the Aravis project, an open source implementation of GiGEVision and USB3Vision protocols.…
-
**Describe the bug**
With the switch to Debian bullseye, Raspberry Pi OS has adopted [libcamera](https://www.raspberrypi.com/news/raspberry-pi-os-debian-bullseye/) which seems to have changed how dat…
-
Based on fedora image: Fedora-riscv64-vic7100-dev-raw-image-Rawhide-20210419121453.n.0-sda.raw
The function of Camera CSI is not supported yet since it will cause system instability(kernel panic) a…
-
Hello everyone, I'm trying to get hardware acceleration to reduce the cpu consumption while using picamera2 to stream the camera video.
I have a cm4 with two official raspberry camera 3.
Streaming…
-
I want to record RAW RGB888 low resolution video. In [the docs you stated that](https://picamera.readthedocs.io/en/release-1.10/fov.html#encoders) camera outputs YUV format before the data comes to th…
-
Hello,
I'm booting RK3288 Tinker Board with Raspberry Camera Module V2 attached (IMX219). Here is the output of dmesg | grep i2c
[ 0.751264] i2c /dev entries driver
[ 0.759772] of_get_nam…
-
Hi, i am having issues using hybrid mode. all works well with just the DSLR connected.
The camera doesn't support live view (i have tried a separate DSLR that does have live preview but its too lagg…
-
hi @AlexxIT and all,
Need some guidance/assistance. We have multiple sites (not really sites, a pole with fibre without static IP's and 2+ cameras). Some neighbourhood watch communities got anythin…