-
Intelliflo VS pump is off, but flow is reported as 55 GPM in state/all JSON
### Expected behavior and actual behavior
http://myserver:4200/state/all
expected: GPM is not reported or is reported a…
-
### Expected behavior and actual behavior
Expected: auto-detect panel (easytouch) and all connected devices. not detecting anything and going into error loop. Last week's code detected everything w…
-
Hi, I'm using version 5.3.1. I have a Pentair VS and iChlor 40 with no controller. Using the virtual pump controller, I've noticed that the pump display continuously toggles from enabled to disabled a…
-
[replay.zip](https://github.com/tagyoureit/nodejs-poolController/files/4755974/replay.zip)
### Expected behavior and actual behavior
Intellicenter i10ps being recognized as Intellitouch i5+3S
###…
-
### Expected behavior and actual behavior
Status and chlorinator commands being sent and reflected by UI.
In fact, sends commands, SWG responds and changes modes but responses not being correctly in…
-
I get this on the dev console and and blank page after selecting a pump. once I am in the mode I have to do a git clean -xdf and re-install to clear it. Otherwise every time I go to the webClient I ge…
-
Not so much an issue, but interesting findings that I thought anybody working on this would find useful.
I'm in the middle of creating a UI in Angular, and needed the ability to programmatically de…
-
Here is the packet capture from my intelliconnect. I have an intellipro vsf pump, the ichor 30 swg, and intellibrite 5g color lights. The intelliconnect phone interface is very slow, 5-30 secs betwe…
-
### Expected behavior and actual behavior
[packetCapture.zip](https://github.com/tagyoureit/nodejs-poolController/files/4639713/packetCapture.zip)
No change to setpoint when heat toggles on/off
…
-
### Expected behavior and actual behavior
Pump status show be On when pump is running. RPM and Watts are accurately displayed. Status is also accurate when priming.
### What is actually happening…