-
after updating nrfconnect && connect-ble app, Ble Dfu always return this error.
[DFU failed with error: When writing 'ENTER_BOOTLOADER' command to Buttonless Characteristic of DFU Target: Timed out…
-
I can not get the H743ZI into DFU mode nor can I find anything about how to put the device into DFU mode other then ST-LINK V3 can do it if you have ST-LINK V3... I've read the information about how t…
K2AAE updated
4 years ago
-
In the reset procedure of the I2C implementation a specific I2C address is used if DFU mode is requested at boot:
https://github.com/hcrest/bno080-nucleo-demo/blob/99cd29ca48b2583fa0a1cf938aa963f3e5d…
-
The Upload fails when I create a project with the framework libopencm3 and the board Maple Mini.
libopencm3 framework platformio.ini
```
[env:maple_mini_origin]
platform = ststm32
board = maple…
-
### Describe the enhancement you're suggesting.
You removed the animations why not the update icons to.
### Anything else?
_No response_
-
I wanted to move my setup (Spider 2.3 and Paspberry Pi Zero 2W) from USB connection to UART.
Reconfiguration of Pi according to the FYSETC documentation was easy, but when I tried to reflash MCU - th…
-
### Device
iPhone 6s+
### Version
iOS 15.8.2
### Passcode?
- [ ] Passcode is enabled.
### Start going into detail..
I'm attempting to run palera1n on a Raspberry Pi 3 B+ running Raspberry Pi OS…
-
Hi,
My name is Richard Hughes and I'm the guy behind the ColorHug project. For a few hardware versions I've been using the Microchip USB stack which I've been getting increasingly frustrated with. In…
-
The EBB can be put in dfu mode and the file upload works. It does not show up with lsusb after a reset. This is with both the pre built and compiled firmwares.
-
[02May2024 20:50:31.087] [Worker-Main2/WARN] [ModernFix/]: The namespace dungeons_enhanced contains an outdated structure file, which can cause worldgen lag. Please view debug.log for the full filenam…