-
### Description
So I was trying to flash a 16MB winbond rom but i couldn't get it to do it.
Now external sources said that the approach is to send a WREN command to let the chip set the WEL flag w…
-
Thanks for including the documentation in English for the CH341 IC - my Chinese is non-existent! :relieved:
I just purchased a cheap-as-chips HL-340 translucent bodied USB to serial adapter/lead a…
-
Can you please add support for Arduino Pro Micro 3.3V ?
-
- [ ] **PlatformIO Core**.
If you’ve found a bug, please provide an information below.
### Configuration
Ubuntu 20.04
**PlatformIO Version** (`platformio --version`):
Platfo…
-
Ref: https://github.com/avrdudes/avrdude/issues/788#issuecomment-1141208371
It is strange that it works for one Pro Micro clone but not on the official Leonardo.
```
PS C:\work\avr\avrdude_test…
mcuee updated
9 months ago
-
Hi. I suppouse the problem is in erase flag. I use buton PlatformIO:Upload
Platformio.ini:
```
[env:megaatmega2560]
platform = atmelavr
board = megaatmega2560
board_build.f_cpu = 8000000L
bo…
-
Hello I have built the code in Atmel Studio and clicked Release, to which a folder is made and a .elf and .hex file is created. I have burnt the .hex file to my Mega 2560 and the led blinks very fast …
-
After the previous issue I mentioned (issue 122), I had a good check through the code, as requested, and found a few places where there were 8-bit addresses used, where they should probably be using 1…
-
```
What steps will reproduce the problem?
1. Wire Arduino NG to an Arduino 23v.3 r.2 (2008 design) with an virgin atmega8
2. Not wire the HB, ERR and PMODE leds
3. Try to upload the most recent bootl…
-
```
What steps will reproduce the problem?
1. Wire Arduino NG to an Arduino 23v.3 r.2 (2008 design) with an virgin atmega8
2. Not wire the HB, ERR and PMODE leds
3. Try to upload the most recent bootl…