-
```
I (269) cpu_start: ESP-IDF: v5.1-dev-5454-gdc016f5987-dirty
I (277) cpu_start: Min chip reRAM available for dynamic allocation:
I (298) heap_init: At 40814C80 len 00067990 (414 KiB):…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
``` C
uart_config_t xUartConfig = {
.baud_rate = ulBaudRate,
.data_bits = ucData,
.parity = ucParity,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Hi all!
The not so new esp32c3 does no work with this library.
I have successfully implemented a new library that uses the native "twai" library from espresiff, so far it works with esp32c3 -at l…
-
This is idf_py_stderr_output_17404:
silence:0 sdkconfig:G:/ESP32/esp-at/module_config/module_esp32_default/sdkconfig.defaults
esp-at branch: master
esp-at docs version: latest
CMake Warning at e…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Board
ESP-WROOM-32
### Device Description
N/A
### Hardware Configuration
N/A
### Version
v2.0.6
### IDE Name
Arduino IDE
### Operating System
Linux Mint 21.1 Vera
### Flash frequency
…
-
Is it possible to have an example implementation where ESP32 is use as the HOST and ESP32-C3 as the client for both Wifi and BLE with SPI and/or Uart. Thank you.
-
How is it possible to reset the device so it will be possible to upload a program?
on the T-Display S3 you have to press Boot and Reset at the same time and then leave the reset button. How it can be…