-
**Describe the bug**
First raised on Facebook post: https://www.facebook.com/groups/615579009972782/permalink/896274541903226/
Predbat is reporting low load figures, and also choosing to freeze char…
-
**Describe the bug**
When the mode is changed from say "Control charge & discharge" to "Control charge" and there is an active discharge action, that action is not interrupted.
**Expected behavior…
-
Hi all,
Had my system fitted today. Looking to link it with HA. I have confirmed I can connect locally from the givenergy app.
Installed the custom integration today, added the IP address from …
-
**Describe the bug**
On my givenergy my charge rate is set to 3600 as I'm on a 5k hybrid charger gen 2.
Yet for some reason it seems to only charge at 2500w.
![Screenshot_20231226_142603_Home As…
-
**Describe the bug**
I’m experiencing some issues with Home Assistant when running appdaemon-predbat add-on (I don’t experience these issues when I stop the add-on). I’m running everything on a Home …
-
**Describe the bug**
Fresh install. First run. Giving error in Log File
Inverter_limit set to 11500, but I now don't think it is relevant.
2024-08-20 22:01:06.652055: Reserve min: 4.0% Battery_m…
-
Happy Christmas! thank you for your work and making predbat available to us!
**Describe the bug**
In the plan, the PV kWh column sometimes shows a fixed value, after reaching a certain point - thi…
-
I am using GivTCP setup as add-on in Home Assistant. Is there a way to setup inverter time from home assistant?
-
### Describe the bug
Latest release has removed "export" from rate sensors meaning that PredBat cannot find rates as it searches for this to assign export rates.
### Reproduction steps
Export rates…
-
I notice predbat sometimes tries to set battery reserve to 100 which fails. I have an AIO and attempted to set the reserve to 100 manually through the givenergy portal which also fails with a ‘timeout…