-
HG doesn't use custom device handler after startup.
For example I have Z-Wave.Me Floor Thermostat and there is a custom device handler for this device. After first discovery HG doesn't ask devices for…
Bounz updated
9 years ago
-
I got the Aeotec multisensor, it gets added to Homegenie just fine, gets detected as a multisensor.
When I try to get or set Configuration Variables to specify the data I want to receive from the sens…
-
I'm giving a test to HomeGenie (from binary download). I'm using my workstation which of course runs Apache on port 80. Moreover, running on ports below
-
Hi Genie,
some ideas for thermostat:
- add a range temperature, near set point with step of 0.25 or 0.5 degree for not start and stop the boiler every 5 minutes, when the temperature changed fast, f…
-
I get this piece of code in index.html on the analyze page.
Look at the second last line, "getinter" there cause an uncaught error, which I think is what breaks the Analysis page.
``` javascript
// …
-
Hi All,
As described in the topic below
http://www.homegenie.it/forum/index.php?topic=579.0
My set-up is HG r453 on raspberry PI with CM15Pro running in the Netherlands (220V).
Issue is best descri…
-
I've been looking to work on homegenie and fix my zwave thermostat but I'm having front-end issues.
If you clone the repo, open in visual studo, and run HomeGenie, the app runs fine but you'll see w…
-
Hello,
Following my post on the forum (http://www.homegenie.it/forum/index.php?topic=66.new;topicseen#new), I have found the cause of the wrong temperature reading.
In the method "Parse" (see code b…
-
Hi, Genie.
When I tried to debug HG on PRi from my Mac with Xamarin Studio/MonoDevelop for the first time, it was a non-trivial thing. So I suggest to add the following information in Readme.md file.
…
Bounz updated
9 years ago
-
This may be related to issue 30 or not. I issued 3 X10 commands from a PLC controller (X10 XTP) in quick succession. HG saw the commands come in but appears to have crashed after the 3rd. Within ap…