-
Using laserweb with our self-made lasercutter we have noticed that frequently the gcode generated by the "simple cam" of laserweb have a lot of usless G0 move. In our statistics we found out that in t…
-
add the group assignment.
group assignment:
make lasercutter test part(s), varying cutting settings and slot dimensions
individual assignment:
cut something on the vinylcutter.
…
-
I'm having troubles exporting g-code when engraving a job. (File -> export laser code) File is empty. If I use the execute function it does work.
Related to https://github.com/t-oster/VisiCut/iss…
-
Paraphrasing from a discussion with @wolfmanjm in Oct:
@wolfmanjm said
Maybe it is time to reconsider a special LW only command that sends a raster line at a time?
This will require some thought …
ghost updated
7 years ago
-
Hey!
We are using VisiCut in our FabLab and have a rather big problem:
Whenever we try to use another orientation method than "top left", the laser still starts as if it was supposed to do so. Even …
-
The PushPull SE (student edition) which is presented here was developed for a student workshop within the 3DMIN research project. It is the third iteration of the PushPull Instrument. This homepage se…
-
I notice in the grbl driver you remove the response string from the config screen but the generic driver still checks the response.
generic driver:
`protected String identificationLine = "Grbl…
-
Using Visicut to create a graphic gcode file, the file produced is 110% using pronterface, but I cant get visicut to print the gcode graphic file only a few lines.
What am I doing wrong please?
-
The filter for our laser cutter is currently pumping exhaust air on the laser cutter. We need a fitting exhaust air tube, find out the dimensions first and document them here and in the wiki.
-
Curious what the lasercutter setting in the machine configuration does. I am currently running a version of GRBL that is optimized for laser engravers. The version of GRBL I am running removes the pau…
tklus updated
8 years ago