-
**Have you look for this feature in other issues and in the wiki?**
Yes
**Is your feature request related to a problem? Please describe.**
No possibility to change measurement range from 2000ppm to…
-
When compiling for adding support for MHZ19 to the board NodeMCU Lolin, I get this error:
In file included from sketch/config/sensors.h:757:0,
from sketch/config/all.h:33,
…
-
-
First of all thank you for the great software, Theo.
I use it mostly on NodeMCU or Wemos D1 Boards.
I have a 2 feature requests:
1.
The measured values from the BME280 are therefore inaccurate…
-
Have added a MH-Z19 to a RP3B and added enable_uart=1 to /boot/config.txt but still cannot get data from it. Pins (MH RP3) are 2 (RXD) to 8 (TXD), 3 (TXD) to 10 (RXD), 7 (GND) to , 6 (VIN) to 3 (5V).…
-
Hi,
I am getting boot loops with latest version.
```
Free Mem | 18984 (18072 - ruleMatch2)
-- | --
Boot | Manual reboot (17)
Reset Reason | Hardware Watchdog
```
Reverting to 20180914 ever…
-
I thing something is wrong with my_user_config.h because with the latest release version I can't use WiFi Smart Config (I use it without problems on versions 5.x.x)
- [x] _Searched the problem in i…
-
### Summarize of the problem/feature request
When there is a lot of traffic on the WiFi network or the node is too busy it seems that some send/ack frames on layer 2 get lost and are net or not in …
-
## Mycodo Issue Report:
- Specific Mycodo Version: 6.1.0
#### Problem Description
Please list: What temperature probe type would you recommend for a 55 gallon drum sterilizer? I would like to…
-
Project name : CO2 Alarm
- Basic : mbed board + CO2 Sensor
- Display : 3 color led (Turn color from blue to red when increasing CO2 ppm in the air)
- Buzzer to notify when CO2 ppm in the air is o…
ghost updated
6 years ago