-
```
Add LIN protocol.
Check the Microchip MCP2021 transceiver.
```
Original issue reported on code.google.com by `ianles...@gmail.com` on 31 Mar 2009 at 2:37
-
```
Add LIN protocol.
Check the Microchip MCP2021 transceiver.
```
Original issue reported on code.google.com by `ianles...@gmail.com` on 31 Mar 2009 at 2:37
-
```
Add LIN protocol.
Check the Microchip MCP2021 transceiver.
```
Original issue reported on code.google.com by `ianles...@gmail.com` on 31 Mar 2009 at 2:37
-
http://ww1.microchip.com/downloads/en/DeviceDoc/80349c.pdf
http://forum.mysensors.org/topic/536/problems-with-enc28j60-losing-connection-freezing-using-uipethernet-or-ethershield-read-this
-
Concerning this warning
Some people have reported an undocumented bug that can potentially corrupt the I2C bus. It occurs if an MCP230XX input pin state changes during I2C readout. This should be v…
-
Hi Could you add support for the Atmel (Microchip) AVR Dragon programmer?
(moved from Arduino Issues #7269)
-
Hi,
A week ago I setup NUT Server on a Raspberry Pi 3 connected with USB to **Powerwalker VFI 1500 RMG PF1** UPS.
`nut-scanner` detected it like
```
[powerwalker]
driver = "nutdrv_qx"…
-
Hi all,
I'm trying to make the ATWILC3000 shield board working with a CM3+ with IO board.
I'm using the drivers from the Microchip repo:
https://github.com/linux4wilc/driver/
I made a custom…
-
**Bug Description**
When using the `adc_raw_to_millivolts_dt` function at line ~804~ 906 of the `include/zephyr/drivers/adc.h` file, the oversampling described in the devicetree is not applied. Thi…
-
```
Add LIN protocol.
Check the Microchip MCP2021 transceiver.
```
Original issue reported on code.google.com by `ianles...@gmail.com` on 31 Mar 2009 at 2:37