-
I have a small PCP CNC running GRBL 1.1. For safety reasons it sits in an enclosure and I am considering adding a door switch to ensure the machine cannot be run with the door open.
My concern is t…
-
I'm trying to build my own milling machine - just because I like building things (so, no, "why don't you just buy one on aliexpress comments!). Some of my components (z-axis for example) are big chunk…
-
This is an enhancement request for multi-axis screw mapping. That is the ability to have piece-wise linear adjustment to position (of both a moving axis and any dependent axes) based on a lookup table…
-
Hello,
i think it would be useful to have some simple command to center any object in OpenSCAD.
eg. if i have `translate([10,10,10]) cube();`
i'd like to center it back using `center() translate(…
-
First of all I want to say a huge thank you for such a needed project. milling the PCB on the CNC for me at this stage in the end nepredskazuemy result due to irregularities of the Board. I think that…
-
Create issues for each of the following items:
- [ ] [JEP 211](http://openjdk.java.net/jeps/211): Elide Deprecation Warnings on Import Statements
Only impacts semantic analysis.
- [ ] [JEP 213](http…
-
I run a small manufacturing shop and want to retrofit 3 old milling machines on which I do some production runs (ie. make lots of 30-50 pieces in one go)
I have a variety of products (50 variants) fo…
-
I assume that for the Schlage Super Bump key you are wanting the following dimensions
Spacing (inches)
0 - .075
1 - .231
2 - .387
3 - .543
4 - .699
5 - .855
6 - 1.011
7 - 1.167
Depth (in…
-
The following information is taken from https://github.com/cncjs/cncjs/issues/514
> Other controllers have a soft-configurable (does not require recompilation) option to include both machine and wo…
-
Hello,
Maybe I want to convert a proxxon MF 70 to CNC. I will design the PCB with eagle and make it with etching technology. I think grbl is a good solution to drilling the board, isn’t it?
Therefor…
if2s updated
11 years ago