-
I got an `generic/unspecified error` when I open `pulseview` application.
![image](https://user-images.githubusercontent.com/10269596/80813890-7ab6ab80-8bfd-11ea-824d-84669702b053.png)
log
…
-
‘class TwoWire’ has no member named ‘setClock’
-
I've been using multiple boards recently plugged into the same host and I've left an empty file on each to mark them so I can ensure from REPL I'm using the correct board when it's important. I notice…
-
my MCU is ESP32, run at frequence 80Mhz. develop with esp-idf.
i read the PDF, and confuse with the wait function.
i have modified the implement of function waitEE with
`vTaskDelay(ms/portTICK_PERI…
-
Hi, I have join latest GroupGet campaing and finally assembled the camera. It is great project, congrats!
**1. I am just curious, initial setup showed "Lepton2.5", but I should have 3.5. Just for c…
BruXy updated
4 years ago
-
Hello all,
I Need help regarding MLX90614 i2c communication.
I am using a ESP32 board which is communicating with MLX90614 i2c temperature sensor.
Sensor is directly soldered on the ESP32 board, …
-
I have a ESP8266 gateway with an CCS811 and an SI7021 Sensor. Gateway reports values for both sensors.
If the gateway reports values for a node, at same time it reports 0 values for the own sensors.
…
-
My HTU21D gives an input/output error, while it still works outside of terrariumpi..
`
2019-07-28 03:02:02,974 - WARNING - terrariumI2CSensor - Error getting second part of data in bytes from se…
-
Hi!
It would be helpful to be able to choose the "ADC conversion rate" as controlled by the CR0, CR1, and CR2 bits in the Configuration Register.
I use this sensor for citizen science and scie…
-
The Portmaster was not able to initialize the nfqueue. This might be connected to #82 - but in that case the error later changed to not being able to initialize iptables itself.
**What happened**:
…