-
Hey,
Just wondering if there are any changes or optimizations I could easily use to speed up things on an esp32-s3, with 2MB of psram?
My output is a 480x480 16bit RGB interfaced display.
I am c…
-
Compilation environment:
ESP-IDF V5.0.4
Micropython V1.22
Use the following command?
make USER_C_MODULES=~/esp/micropython/examples/usercmodule/lvgl_micropython/micropython.cmake
-
It would be interesting for us to run squeezelite on S3 (for the cost among others...)
But we are faced with a problem:
Squeezelite compiles well only with IDF4.0 but this version of IDF does not su…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
### Board
ESP32-S3R8 SoC custom board
### Device Description
Own hardware based on the ESP32-S3R8 SoC with 32MB Flash and 8MB OCTAL Psram
### Hardware Configuration
RTC Clock
IO Expand…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Board
ESP32-S3-WROOM-2-N16R8V module
### Device Description
Custom setup (module directly wired to USB UART programmer)
### Hardware Configuration
USB UART connected to RX and TX lines, 10k p…
-
```
ubuntu@ubuntu-vm:~$ uname -a
Linux ubuntu-vm 6.5.0-27-generic #28~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Fri Mar 15 10:51:06 UTC 2 x86_64 x86_64 x86_64 GNU/Linux
ubuntu@ubuntu-vm:~$ pip3 install tp…
-
Hi,
I'm designing a controller board for a [backpack](https://gitlab.com/phodina/badboard) I recently bought which had let's say poor and proprietary implementation.
Normally I'd use STM32F4 wit…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…