-
Hi, apologies if this is already dealt with, or if the question should be asked elsewhere.
I am connecting to pyocd (0.28.1dev) via `target extended-remote localhost:3333` and after loading an applic…
mubes updated
4 years ago
-
Hi there,
I used pyocd on STM32F4 and everything worked fine. When I tried to use pyocd on STM32H7, I had problems. I had read Docs.
`C:\Users\Administrator>pyocd pack -u
0000258:INFO:__main__:Upda…
-
`pyocd pack --update` generates one "ERRO" line in red and dozens of "WARN" lines. It returns a status of 0 (success). Errors and warnings should be non-zero for scripting purposes.
-
Hello,
To my understanding pyOCD does not yet have the functionality for programming the IMXRT1160. I'm just trying to build a simpler workflow for myself without having to use MCUXpresso. However,…
-
The freeze occurs very often. Flash never continues when at this state.
Version in use: ddf36148a959fe27598c6d244b1039cd7b888293
```
$ pyocd flash -vvv -u 023600001985ea0a000000000000000000000000…
-
Hardware may not be able to redundantly set CMSIS-DAP in the USB iInterface field as well as the "product" string.
Some USB driver software wires the iInterface field to be a specific value dependi…
-
I'm trying to use BLE Nano 2 as a bluetooth LE dongle powered by Zephyr (e.g. https://devzone.nordicsemi.com/blogs/1059/nrf5x-support-within-the-zephyr-project-rtos/), but had several UART and USB iss…
-
HI, thank you very much of this great project. I would like to report an issue where the pack command couldn't find the SAMD51 target although it is listed in the offical pack https://www.keil.com/dd2…
-
### Description of defect
Nucleo WL55JC board is recognized and can be flashed without any issue but once flashed, any program does not seems to start, I tested blinky also without any success.
…
-
Hi,
It seems there is a problem with the flash write routines for STM32H750. A simple program like the below gives corrupted flash for about one out of five attempts for a 30 kB file, without any t…