-
### The problem
I created new venv with python 3.11.2, installed HA Core 2023.3.1 there and run hass --script check_config
I have a bluetooth tracker enabled in my configuration.
HA tries to inst…
-
My Raspberry Pi 3 runs unstable and crashes every few days. Before the crash /var/log/messages shows the following error repeatedly with a separation of a few minutes:
> Jan 25 18:36:22 raspberrypi…
-
I have connected a pn532 board via SPI port. I have successfully installed libnfc and it is able to get detected by nfc-list and nfc-poll.
What do I need to do so that it gets detected by pcsc_scan a…
-
#### What were you doing?
Loading the OctoPrint web interface
#### What did you expect to happen?
The print to continue normally
#### What happened instead?
My printer stops for a few seconds, stut…
-
Running this program:
```
MODE 3
PRINT STRING$(100, "0123456789")
```
results in the first line wrapping one character early on the Pico, but not when run locally in a native console; I don't und…
-
# 在Docker 中运行 OpenWrt 旁路网关 | 美丽应用
文章更新 20191006 初次成文 20191117 修复文章内因 Markdown 渲染导致的命令错误问题 写在前面 今天小苏为大家带来的是（咕很久的）在 Docker 中运行 OpenWrt 做旁路网关的教程~ 场景1 众所周知，OpenWrt 是面向嵌入型设备的 Linux 发行版，所以 OpenWrt 系统运行时的资…
-
Using CC1310 on a SMARTRF06, git rev a38cfc889ebb2197b8775c79763e04c592fd4b77, I get:
```
~/contiki/examples/hello-world$ make TARGET=srf06-cc26xx BOARD=srf06/cc13xx hello-world.upload PORT=/dev/t…
-
### The problem
I'm attempting to integrate a Linear (GoControl) Zwave garage door controller into my Home Assistant environment. The physical device is installed, and is paired with my Zwave stick.…
-
It would be great to have PrintTimeGenius work with Klipper as well. Klipper is getting more and more widespread and I would love to have a more accurate estimate with it.
Please fill this out:
O…
-
Probably not a issue just me being stupid:
NO VOLUME * Please check your volume setting on your device and use your device to increase the volume. If setup/dac is recognized it you will see volume …