-
No ports show on the snap store version, any idea?
-
hello! i get an error when i run——python diffcsp/run.py data=perov_5 expname=reproduction_diffcsp_perov
diffcsp/run.py:172: UserWarning:
The version_base parameter is not specified.
Please spe…
-
```
[[0, 'ADD_MODE_APPEND', 1],
[1, 'ADD_MODE_BULK_APPEND', 2],
[2, 'ADD_MODE_BULK_INSERT', 3],
[3, 'ADD_MODE_INSERT', 0],
[4, 'ARC_HIGH_DEF', 5000],
[5, 'ARC_LOW_DEF', 20000],
[6, 'ARC_M…
-
[log.txt](https://github.com/user-attachments/files/17262858/log.txt)
When trying to flash my samsung phone with the right loaders according to https://www.temblast.com/ref/loaders.htm I tried both l…
-
Navgauge uses its own 'universal' format for sending basic navigation data to the browser. 'universal' and 'basic' mean that data from different sources (NMEA 0183, N2K, different sources within a N2K…
-
My plotter with Your software is working.
I have only one problem. Pen down - it is very fast movement, and when hit the surface creates bigger dot.
I saw one your plotter with stepper motor for pen…
-
hello,
i have the mega x5 grbl firmware and connect them to a hc-05 bluetooth module. By other programs like laser grbl/ lightburn i will connect directly,but grbl plotter says:
* COM5 not avail…
-
I supply the ADC with a stable voltage, supplied by a separate LM1117 3.3V with 100uF capacitor a resistor voltage divider. The LM1117 will provide 3.3V regardless of the load of the ESP's own voltage…
-
![image](https://github.com/rsta2/circle/assets/26408605/88b187ab-89e1-47ff-8602-ba1b30671151)
Hi bro, when i do serial printing for my own `CSerialDevice`, when some error / exception happened fro…
-
This is an thread where you can share screenshots and gifs of how you are using egui. Feel free to also share a link to your project and/or the source!
There is also a showcase gallery on the offic…
emilk updated
2 weeks ago