-
Hi, did you change the Speeduino original design?
-
Hi,
during testing of black STM32F407VE6 board has been discovered, that external baro input doesn't work. When I tried to swap pins between various inputs, the problem moved with the baro pin, so it…
-
4squirts alternating basictrigger v8 2injectors.
Duty stops att 24.5% ????? and it goes lean.
Max duty is set to 98%
Swapt to MS2 and it goes upp to 95% att full throttle.
---
Want to back …
-
I observed this behaviour on a teensy 3.6 board, stepper open loop, minimum steps = 1, raising it makes the problem disappear, engine stopped, homing done.
Took a quick look at doStep() but been unab…
-
https://github.com/noisymime/speeduino/issues/415
Still in there.
-
**What I wanted to happen:**
- have speeduino control the condenser fan and A/C compressor relay
- When the A/C button in the car ( AUX Input 0) is pressed, the compressor relay ( programmable …
-
Hi! Firstly amazing work, loving the detailed analysis!
I think I know the answer to these questions based on your writings but I'll ask anyway. I'm running a megasquirt without any onboard knock f…
-
After the ADC files was changed a while back, the adc issues returned.
Behaving just like ADC issues I had long time ago.
I use F7
Did a screen recording how it looks like.
This is by applyi…
-
-
Setup a preprocessor macro(s) to have the timers do either all injectors or all ignitors with a total of 9 timer compares. There could also have a setup to have a split at different number of compare…