-
DoD :
- [x] succefully camera captured images
- [x] Integration between MQTT publisher-subscriber (server-client raspberry pi ) working successfully.
Blockers :
1 [: https://github.com/cu-ec…
-
`svd2rust` recently released version `0.18.0` which contains some breaking changes. This is the version downloaded and installed when running `cargo install svd2rust`.
When running `make` for this cr…
-
**Is your feature request related to a problem? Please describe.**
st microcontrollers are capable of being flash over USART, what would it take to bring this feature to fwupd?
are there any existin…
-
```
debian@BeagleBone:~$ sudo python3
Python 3.9.2 (default, Feb 28 2021, 17:03:44)
[GCC 10.2.1 20210110] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> from…
-
Hello,
I am currently making driver on optee for CRYP of stm32mp157c-dk2 board which is crypto peripheral on cpu bus.
And I refer to linux driver source code already implemented.
for accessing …
-
## Expected Behavior
After successful provisioning and image pulling, we would like to be able of starting in offline mode (without network available )
## Current Behaviour
The aziot-edged is…
-
I used STM32MP157A-DK1 with optee3.9 to run hello_world.
When I ran `tee-supplicant &` , it printed `ERR [3481] TEES:main:704: failed to find an OP-TEE supplicant device `
I checked /dev/tee* and…
-
I am trying to run crystalfonts lcd cfaf240320a0024sc (https://www.crystalfontz.com/product/cfaf240320a0024sc-240x320-full-color-touchscreen-tft-2-4) with stm32mpu over SPI. The LCD controller is ST77…
-
This sketch illustrates a failure of SPI.transfer with a NUCLEO-H743ZI2. The sketch use a SCLK rate of 400kHz.
```
#include "SPI.h"
const uint8_t CS_PIN = 10;
void setup() {
SPI.begin();
p…
-
I am trying to add ssh to my optee build. How can I do this?