-
There seems to be a pretty serious issue with jitter when running SyncPWM at high rates (primarily 1 kHz but also evident at 500 Hz). I've done a little testing with Sparky2, MPU9250 @ 1 kHz sample ra…
-
Hello all. i am 76 years young and am trying to get my new F3 into a flying state.
Installed the St link and flashed ok.Changed usb position for GCS bootloader and press black button on F3.Leds.Blue a…
-
Actual we don't have the flight mode in MavLink HeartBeat.
I like to add this.
The Problem; our IDs didn't fit to the flight mode IDs from MavLink.
Only this are in Mavlink
Stabilization1 = Mavli…
-
Per #1782, consider nuking vbar
fujin updated
9 years ago
-
Reproduced on Brain-20150714. Dropping back to 184hz brings the …
fujin updated
9 years ago
-
It would be great to have a python script that allows visualizing common things (attitude, velocity, position as well as the filtered results) in a time locked scrolling explorer.
I find myself commo…
-
Summary:
- If the total size of any UAVObject is greater than 244 bytes, sparky2 goes into a reboot loop
Platform info:
- Core-i7 CPU
- ubuntu 12.04.5 amd64 / gcc-4.8.1
- sparky2 connected via USB (s…
-
I get the following when trying to run sim_posix_revolution (as compiled from next):
Running as PID: 32403
Timer Resolution for Run TimeStats is 100 ticks per second.
Unable to initialize flash ut s…
-
There are very few of the boards out there and probably none are flying. Supporting CC uses a few bytes of CC3D memory and adds complexity in several places.
@solidgoldbomb @CheBuzz @guilhermito @el…
mlyle updated
9 years ago
-
As I understand it, PPM (and PWM) input when using 12MHz mode is currently broken. One workaround is to reassign the pin to a timer that is left at 1MHz. However, it shouldn't be too hard to have the …