-
Hi guys, I ran into a nasty problem on my Artix Linux pc, which affects all currently available (zen, liquorix, tkg, mainline, etc) kernels 5.16 and newer, including tkg, for this reason I am also pos…
-
Hi. I have a working custom RPI CM4 board. CB1 module (v2.2) after power on eats 120ma from 5V bus and it looks like it can't start. RX/TX shows nothing, hdmi/ethernet nothing. I tried to set usb boot…
-
Hello!
I have 2x N8R2. After flash YD-ESP32-S3-N8R2-MPY-V1.1.bin
```
[22:41:37]ESP-ROM:esp32s3-20210327
[22:41:37]Build:Mar 27 2021
[22:41:37]rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
…
-
Seeing an issue with `pio remote run` command. My setup:
- VM that holds my [platform.io](http://platform.io/) project for esp32-c6 dev kit
- Local on my mac, I have the hardware plugged in and am …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
After normal Pi5 update Adapter is not working anymore. Any ideas ?
Installierte Version:
3.1.0
jscontroller:
6.0.11
Plattform:
linux
Betriebssystem:
linux
Architektur:
arm64
Geschwindig…
-
The original design for Anachro had multiple SPI lines, which was better suited for the nRF52's muxable pins. For Stargazer, I've ended up using a single shared SPI bus, which means that flexibility m…
-
Hello
itdb_test.py file to run I get the following error:
ERROR: could not insert 'fbtft': Exec format error
Traceback (most recent call last):
File "itdb_test.py", line 11, in
ensure_fbtft()
…
-
I just got couple of Metro M7 both SD and Airlift models.
Since the Metro M4 boards already added, perhaps adding the M7 boards shouldn't be much of an issue?
I can provide any information that is r…
-
**Describe the bug**
Built and ran the usb mass storage demo with zephyr v3.2.0 on mimxrt595_evk_cm33, wait for 30 seconds to usb msc can mount to PC.
**To Reproduce**
Steps to reproduce the beha…