-
From my perspective as the maintainer of `avr-hal`, the HAL crates are becoming more and more of a burden to maintain because any global change needs to be reflected in each one. There is a huge amou…
Rahix updated
3 years ago
-
The current optiboot_x was written for ATmega4809, and assumes that all of flash memory is mapped into the RAM address space. Also, it doesn't handle any of the hacks for an extended address byte.
…
-
```
avr-gcc 4.7.0 complains that const_uint8_t etc. request data to be placed in a
read-only segment in memory without that data being actually const.
The specific error message is:
error: variable …
-
My understanding is that pointers to functions (which are used somewhat commonly in C++?) are done on AVRs with more than 64k memory by having the 16bit pointers point to "trampolines", which are esse…
-
Please take a look at this as it is a confirmed issue.
Had to resort to Arduino IDE to load firmata.
thanks
-
I am trying to add a new MCU to the list of supported parts. Specifically, I am trying to add the `AT32UC3C0512C` MCU, which is (sorta) similar to the `AT32UC3A0512` which is already in the default co…
-
Hi,
Klipper is probably 3D printing's most advanced firmware.
It is a two part system where the hard math is done on a real computer, and the real time stuff is done on a microcontroller.
A s…
-
```
avr-gcc 4.7.0 complains that const_uint8_t etc. request data to be placed in a
read-only segment in memory without that data being actually const.
The specific error message is:
error: variable …
-
```
avr-gcc 4.7.0 complains that const_uint8_t etc. request data to be placed in a
read-only segment in memory without that data being actually const.
The specific error message is:
error: variable …
-
Hi :wave:
I can't seem to get any application to flash via DFU. I am using a custom board w/ the atmega32u4-MU MCU and I am using the USB-DFU .hex image provided by Microchip on their website. You …