-
So .. after building this thing and programming it .. I turned it on and nothing happened. Lots of messing around ... anyway worked out how to set the fuses - tried doing a PR on the make file but I d…
-
There is any possibility to use Minic engine for non Windows/Linux/Mac operation systems like FreeRTOS?
Cheap hardware that I'm trying to use ESP32-WROOM-32D DevKitc: 2x240MHz CPU, 320KB RAM, 4MB Fla…
-
### Bug Description
This is `bugfix-2.0.x` commit d84aff701e10a49d5ccc69ce323fdb0fdb84b6db
Long travels exhibit stuttering movement when ABL is configured and enabled.
If I switch ABL off by …
-
Bit of a noob when it comes to programming microcontrollers. I am using an USBASP in TPI mode and unfortunately this is my only option.
I have a small program I run on an ATTiny10
For the program…
-
Issue found when doing extended testing for the upcoming Avrdude v8.0 release. And this bug is most likely present with other classic AVRs with a `usersig` memory.
The signature and calibration dat…
-
Hi
I am using the Arduino IDE 1.8.9 and using the latest NRFLite library. I am using an ESP32 on one side and a ATTiny3216 on the other side. Both worked fine transmitting/receiving data. Until a f…
-
Hi- I seem to be having some inconsistent behavior with digitalRead. I have a floating input and I want it to read as a high, so I should be able to configure it as an INPUT and then digitalWrite it t…
-
Cannot get the TFT35 touchscreen to work with octoprint using a MKS GEN L?
When removing the touchscreen, octoprint works normally.
How to fix this problem
-
Freely discuss your opinions on an ARM platform for Grbl, moving forward after v1.1.
-
I am trying to upload bootloader to new atmega328p-smd version but ide shows (in verbose output) syntax error in avrdude.conf file at line 421.
Another error is that the said file (avrdude.conf) can…