-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Using 3 Z-motors, G34 moves to first measuring point and starts to run towards the bed, but g…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I use mks robin nano v3.1 and mks ts35 (spi LCD). when i pause printing with LCD (or filament…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
The first call M109 turns off my extruder cooling fan.
Changing temperature through M104, or…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I did some modifications to my Ender3 Pro and then I ran into strange problems. When ho…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I'm Having an issue running the G34 on my B1 plus with duel Z where the my bltouch prob…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
At random points during the mesh levelling procedure, my CR touch probe will stow, but the Z-axi…
-
### Did you test with a precompiled firmware?
Pre-compiled options not available for T66 Thermistor
### Bug Description
MPC Autotune fails out with MINTEMP error.
Selecting preheat for any…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
I have a problem with pausing and resuming prints. After I pause and resume, head parks twice, a…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I measured and extruded at different velocities and came up with `M592 A-0.004 B0.00126…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I didn't modify anything special in my config and I can no longer compile
### Bug Timeline
…