-
I have written some Python using awoxmeshlight, and can see that I can connect (I think!).
I used the function dir() to see the elements within awoxmeshlight, but if I try to call e.g. AwoxMeshLight.…
-
Hi all,
I can get the RSSI values from BLE devices which are not connected.
However, after I connect a device using Peripheral.connect(dev1), the Scanner() keeps returning the same RSSI value it…
-
Hello `bluez` devs,
### Introduction
I've been working on [bluepy3](https://github.com/Mausy5043/bluepy3) since february 2023.
`bluepy3` is a Python3 interface to Bluetooth LE on Linux. I based t…
-
I use the latest version of bluepy.
when I send data to a device, it will response each message. but it seems blocks somewhere,
and it shows sometime none, sometime twice at a time.
I'm wonder wh…
-
HA установлен в докере на NUC n3050, Ubuntu 16.04.
Компонент установлен через HACS.
После выбора устройства в окне конфигурации и сопряжения, интеграция сообщает об успехе, MAC устройства отображает…
-
Hi there,
I modified the toothbrush.py to work with Inkbird IBS-TH1 (plus) Smart Sensor.
https://www.ink-bird.com/products-smart-sensor-ibsth1.html
Just put the following code in a new file wor…
-
Howdy folks,
I have this weird issue that i can not resolve.
First off, I am using the compiled version of BluePy (1.3.0 with the MTU fix etc etc)
Bluez is at version 5.53.
My problem is that when…
-
Thanks for this great initiative, if this project will work, it will save tons of time for Xiaomi tinkerers worldwide.
I tried to use your code to get a working bind_key for my LYWSD03MMC. Changed …
-
Now that we've got reading data sorted out. I know that the App can interact with the BMS as well. I'm not so sure about changing parameters, but there is one feature that might be useful.
I've noti…
-
Hello,
I am using a Raspberry Pi Compute Module 4 (which is BTW. basically the same as a RPi 4B) to run the basic example `example_ble_1.py` and connect to my SensorTile boxes. The example scans an…