-
-
Thanks for this useful utility.
Unfortunately when I follow the instructions, I'm not seeing intended / expected behavior. I see `Van Ooijen Technische Informatica Teensy Rebootor` in lsusb, and I …
-
Bootupd would write the new bootloader in a new place (B), set BootNext to a new boot entry with this bootloader. And then on reboot would check that the boot succeeded and would do the reverse for th…
-
I'm trying to install eOS 6 build on separate drive (500Gb). Right now I'm running eOS 5 in dualboot with Windows 10:
![obraz](https://user-images.githubusercontent.com/6031763/105755899-38cc5300-5f4…
stsdc updated
3 years ago
-
Support burning bootloaders, including documentation on how to do so, and where to find it.
-
As the title says, booting into uLaunch on 19.0.0 causes the system to crash and Atmosphere printing a message, only letting the user exit to bootloader. Don't have the message on hand, as I removed u…
-
Let's do the work necessary to help push forward a Debian, Arch or other OS base image.
There are multiple components to this:
- https://github.com/ostreedev/ostree-rs-ext/pull/674 will be extremel…
-
Hey,
its not a bug more of a question :P, do you know if its possible to change the bootloader in a way that i can flash a klipper firmware to the board without the need to add a jumper cable on EX…
-
Remove the old bootloader and create a GNU GRUB bootloader for this linux distribution
ghost updated
3 years ago
-
Hi!
Could you please upload the actual source code you used when you compiled Optiboot for these AVRs? I'd like to add ATmega16/32/64M1 and ATmega32C1/64C1 to my [Optiboot flash repo](https://githu…