-
how can the CubeCell device receive downlinks and react to it (switching a relay for example)?
-
Below feedback is based on ASR650x-Arduino source code and examples.
Use of _consistent_ programming style and naming conventions are (for multiple reasons) important aspects when writing software.…
-
Hi team, should IfSkipJoin work yet?
I've got the call in there, but CheckNetInfo() always fails after a reboot even after a successful join (which should be storing the parameters, right?)
I h…
-
Path Problem in Platform.txt not fixed
exec: "C:\\Users\\Dell\\AppData\\Local\\arduino15\\packages\\CubeCell\\hardware\\CubeCell\\0.0.3/tools/gcc-arm-none-eabi/bin/arm-none-eabi-g++": file does not…
-
there are some errors in example for the bmp180 library.
after fixing the example i cannot compile it:
`C:\Users\Lenovo\AppData\Local\Temp\arduino_build_875617/..\arduino_cache_106657\core\core_…
-
Several libraries (HX711, OneWire, DallasTemperature) check the installed Arduino version before including Arduino.h:
````
#if ARDUINO >= 100
#include // for delayMicroseconds, digitalPinToB…
-
Hi Arron
First let me say great hardware product. I am raising a few issues regarding software for the CubeCell.
First the major issue, I have is that the product in aimed at using LoraWAN but y…
-
In the [HTCC-AB01 pinout diagram](https://github.com/HelTecAutomation/ASR650x-Arduino/blob/master/PinoutDiagram/HTCC-AB01.pdf) pin17/GPIO7 and pin16/GPIO6 look like they are standard pins on the side …
-
I'm using the CubeCell Board, is there a pin definition file for the board? For example the ESP32 Heltec modules have a pin_arduino.h file that has the pin definitions - So A0 is pin 36, SS is 18. Is …
-
Using the DHT library (by Adafruit, version 1.3.8, https://github.com/adafruit/DHT-sensor-library) created a compile error because INPUT_PULLUP is not defined in Arduino.h or ASR_Arduino.h respective.…