-
I do not know if this is a plug-in issue or Cura project file issue:
Cura 5.4.0 (Linux Mint Cinnamon)
Calibration Shapes 2.2.4
I add two shapes (cylinders) to use as supports for my model
Repos…
TQM21 updated
8 months ago
-
We mainly do ceramic 3D printing, there is a problem with the bottom layer of printing, as shown below, please check the file.
Hi [smartavionics](https://github.com/smartavionics),
The red line in…
Eazao updated
7 months ago
-
So I added the segmentation to B extrusions into the FlavorParser of Cura but if you slice from inside Cura it doesn't go through the flavor parser it just kind of shows up in Cura. Probably should ha…
-
**Is your feature request related to a problem? Please describe.**
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
Yes, internal bridging for ABS is cr…
-
### Is your feature request related to a problem?
I'm always frustrated when opening a `.stl` file, as I know I have to sit through the entire startup process of Cura.
What I think is a major waste …
-
i need to add a customized infill pattern to the Ultimaker Cura. how it can be done
-
Adding tabs changes the dimensions of the model and scale % in the scale tool, even if only the model is selected. This is consistent across Cura 5.7.0 and another Cura-based slicer with an older Cura…
-
Reproducible with both zsh and bash
```
$z -l Cura
0.5 /Users/kent90/.virtualenvs/Cura
2 /Users/kent90/.virtualenvs/Cura/bin
344 /Users/kent90/Documents/Work/Ultimaker/Cura
$z …
-
### Cura Version
5.8.1
### Operating System
Manjaro Linux
### Printer
irrelevant
### Reproduction steps
1. open a STL file
2. slice it
3. preview
4. move the mouse cursor around, right-click…
-
Request from user:
> Our department regularly resets the machines in our computer lab and we are constantly needing to go to the marketplace on every machine to reinstall the plugin.
>I was wo…