-
**Describe the bug**
Multiple N910C/N910H Models face an issue with WiFi where the WiFi is ON, but does not show any networks.
The only way to scan is by disabling SIM or setting the device to airpl…
-
```
Which board (stock / gruvin9x / sky9x / Taranis) are you using? Taranis
What is your openTx FW version? 2768
A couple of years ago, I lost a nice model when I took off with the FRSKY
module on …
-
I have a couple of ath9k devices:
Netgear WNDAP660
TP-Link TL-WDR4900
Both seem to limit their 5GHz txpower to lower values than I would expect.
I will focus on the WNDAP660 since this runs …
-
The firmware update is restarting what seems to be every 1 minute.
From monitoring the resource logs, it seems to all be working fine then suddenly after what seems like 1 minute (every time its arou…
-
Hey all,
I'd like to create an AP on 6GHz using a compact USB or PCIe module with external antennas.
(It will be used for a robot in areas where 2.4 and 5GHz are saturated)
I read the **Alfa AWUS…
-
jxmx updated
3 months ago
-
In games like Liftoff, DCL or DRL Simulator running under Proton either doesn't recognize an [OpenTX](https://www.open-tx.org/)-based controller or recognizes something but it's output is completely u…
-
```
What steps will reproduce the problem?
1. Calibrate all channels, turn the radio off.
2. Turn the radio on in less than 10 minutes after calibration- all is ok.
3. Turn the radio on after 30 minu…
-
```
What steps will reproduce the problem?
1. Calibrate all channels, turn the radio off.
2. Turn the radio on in less than 10 minutes after calibration- all is ok.
3. Turn the radio on after 30 minu…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
I tried the …